oven mitt tutorial

This week I have been trying out a new pattern for me and making some oven mitts/pot holders.  It was all a bit of an experiment to be honest but I did a very wonky test run - got positive feedback so thought I would run a few up to sit on the table at an upcoming craft fair.

I got myself completely organised and set up a little production line so that I would - in theory - be super duper time efficient.  Unfortunately I wasn't as organised as I had thought and only had enough wadding for my test run and 2 more mitts.  So I did that many and will have to return to make the others later.  I'm proud of my good intentions but may have to work a bit harder on the pre-planning bit :)

If your going to do this project you will need

thread, patterned fabric, plain backing fabric, wadding, shape templates (can be printed out from internet), scissors, bias binding that compliments your patterned fabric and some pins.  I think this one is easier if you have a sewing machine but certainly doable without!

So this is how I did it:

I printed out templates of the shapes I had chosen - heart, star and flower onto plain paper.  I only have an A4 printer so made the shapes into halves and printed it this way.  I laid the straight edge onto the fold in the fabric, pinned and cut out.

I then repeated this step for backing fabric and wadding.  I then cut the backing fabric out a second time but this time cut the shapes in half along the fold line.

I laid the fabric in the order I wanted baking fabric then wadding and then pattered fabric and ironed. This is an important step as it causes the wadding to compress which makes it much easier to manage when sewing and cutting a fiddly shape.

Then take the two halves of the backing fabric and edge the straight seam.  I did this by over locking it and then folding over and running a straight line stitch along it.  When you do this ensure that you fold over on both halves the same side.  When you lay the two halves onto the back of your shape you should see no raw edges on either side.

Now pin together and run a straight line stitch all the way around the edge of your shape trying to ensure you catch all the layers into your stitch.

Once you have done this trim with scissors as close as you can to your line of stitching.  Remove any excess threads or pieces of wadding that are sticking out around the edges.

Now take your bias binding and fold around your shape.  This is the trickiest bit and requires you to take it slowly and ensure the binding is tucked tightly around the shape.

It should look something like this now.

As you can see I added a loop of fabric to the corner of each so that the mit could be hung up in the kitchen.  The idea of these is that they fold in half and your hand slips into the pockets.

 Trim all your edges and check carefully for if there are any sections of bias binding that you have missed with your line of stitching.  If there are you need to neaten that section up otherwise the mit will begin to look untidy very quickly when used.

So there you have it - a cute mit for handling those hot pots and pans.  I think it would brighten up a kitchen but is also a cute idea for a gift.

I found that the flower became very tricky because of the tight curves so I kept sewing the bias binding without all of the layers in it when I hit the corners.  I'll keep trying but didn't end up with a neat enough product to photograph this time.  Maybe next week!

As always I have made these out of reclaimed fabrics so they are ethical and environmentally friendly.

Happy stitching :) 

ps. it was lovely to climb up into my organized craft room this weekend so I have many good intentions to become an organised crafter - watch this space :) 

Pillow Case to Tote Bag

I’ve been trying to use up the fabric that I have had in my boxes for a long time and came across a gorgeous pillow case that I discovered months ago hidden deep in mounds of bedding in a charity shop.  I loved the colours and the flowers but wasn’t really sure what I was going to make out of it.

This week I decided to make it into a tote bag – some stitching and lining later and I ended up with a finished product that was so much better than the pillow case I’d started out with.

Tote bags are great for days out in the sun, trips with the family and carrying as a shopping bag.  If you make them out of recycled fabric then not only are they preventing the use of plastic bags but ethically and sustainable produced too.  Combine that with a relaxing afternoon spent sewing and you have a sustainable, ethical and fun filled bag!

Get those machines out and get sewing!

1.        Decide how big you want your bag to be and cut two rectangles 1.5cm bigger than that all around.  Cut out two rectangles of the same size from a plain lining fabric.   Then cut two long strips that will make up the handles.  I did mine either side of the pillow case and to a 6cm width

2.       Now place the large rectangles right sides together for both the patterned and the lining fabric.  Sew both sides and the bottom of the fabric.  Now turn these out so that you can see the pouch that will make up your bag.

3.       Take the thin strips and fold them in half lengthways.  Sew a line from top to bottom about 1cm away from the raw edges.  Take a safety pin and pin it to one side of the fabric.  Point the pin into the tube of fabric and begin to ease it through pulling the fabric gently as you go.  This should thread through leaving you a tube of fabric with the right side facing you.

4.       Press your handles, bag and lining to leave neat, crisp lines.

5.       Place the lining so the raw edges are facing you and put it inside of the patterned fabric.  All your raw edges should now be hidden.  Fold the tops over to create a neat seam between the patterned and the lining fabric.  Pace the handles flat about 4cm away from each edge and tuck them in between the lining and patterned fabric.

6.       Pin and ensure everything matches up and sits as you want it to.  Make any adjustments and  then stitch a line around the top of the bag ensuring you stay the same distance from the top as this is a visible stitch.

 And there you  have it - just trim your loose threads - your finished product!

Stuffed bunnies

This week I have been working in the afternoons so have spent happy mornings in my attic stitching away.  It has turned into a productive week with a maxi dress finished (photos will come shortly), a few tote bags made, some coin purses stitched and I've also been making these adorable stuffed bunnies.

This blog post just proves that these days you can find anything you want on the internet.  I had been wanting to make some cute stuffed animals but due to my terrible drawing skills I needed a template.  A quick flick through Google images and I found one!

This wonderful blogger has also shared a ready written how to guide so I'm not going to repeat her good work but just share it for you all to follow.  So please check it out!

http://www.craftycupboard.net/2013/03/bunny-softies-with-free-template.html

I plan to add some little eyes to the bunny with some buttons on some and on others a little cross made out of embroidery thread.

As always I have made these bunnies from fabric that has been sourced from charity shops, ebay and other up-cycling projects.  I've been amazed at the luck I have had recently in finding beautiful fabrics that are in amazing condition being sold off for pennies.

Here is a selection of my recent finds - any suggestions of what you think I should do with them???

Hope your all enjoying your week - will post again soon :)

Back to the blog - how to make EYE MASKS

After a few weeks away with sickness and all sorts going on I thought on this gorgeously sunny morning I would complete a project and do some blogging.
 I recently signed up to do a craft fair for the first time.  It's all a bit of an experiment to be honest but it has got me thinking of new things that I can make that people would enjoy owning or giving as gifts.  This morning I made an eye mask which was surprisingly simple, reasonably quick and gives a good professional finish which is always very satisfying.

To do this project you will need:

• Fabric in the pattern of your choice
• A sheet of thin foam ( I used craft foam for kids)
• A backing fabric
• Paper for the stencil, pencil and scissors
• Pins
• Elastic
• Bias binding
• The usual needle and thread :)

You need to cut out your template - I traced an eye mask I already had but a quick look in google images will give you a selection to print and trace if you aren't confident with your free hand. 

Now pin the template onto the fabric and cut around as you would with any pattern.  Repeat this on your foam and your backing fabric.

Place all three together - backing fabric then foam then your patterned fabric on top facing right side upwards.  Now pin together to avoid movement and sew around the edge.  It helps to stay close to the edge so you aren't going to have a hard time hiding the stitching later.

You should be left with something like this.

Now take your bias binding and elastic.  You need to mark with a pin where you want your elastic to sit on either side of the mask.  It needs to be placed at an equal distance on both sides from the top and the bottom to ensure you don't end up with a wonky mask.
 Begin to fold the bias binding round the edge of the mask and pin in place.  As you reach the points for your elastic insert the elastic into the fold at the back of the mask.  The elastic should just lie flat against the mask.

 Now you need to choose a thread that matches the bias binding or choose an appropriate contrast.  You now need to sew round the edge of the bias binding adjusting as you go to avoid any creases.  At this point it is worth going slow and steady and staying close to the edge of the binding.  This line of stitching will show and makes part of the finished product so it is important the stitching is neat and steady.

Now trim any loose threads and there you have it - a perfect gift for yourself or someone else!  Enjoy and don't forget to send me pics of your progress - you can tweet me @jenniwessels

Till next time :)